656 shfter problem. Odd?? Figured out plus

old

Well-known Member
Well figured out the shifter problem I was not using enough force on it. 3 point also did not work so got into it today. A simple pin had fallen out so the control lever did not move the parts as it should have. Bad thing was is there was almost NO room to work to get he pin back in. Had to have the boy help me since his hands are smaller then mine. Plus needed 3 or 4 hands to get in in due to having to hold parts in place. So I am done with this big thing.
 
Congratulations. Some things get painful as they age, some mellow. I hope you had a nice Memorial Day. Jim
 
Any more one day is pretty much like any other day. I didn't do very much yesterday other then sit around the house
 
I mes with the garden every day but it is between the chicken house and the house so I walk by it 3 plus times a day so I stop and pull weeds etc on the way to checking for eggs. Working on tractor is just my way of doing Physical Therapy. If I do not stay active enough my doctors love to send me to P.T.
 
No a lot of times it makes me some $$ since I work on tractor for other people and run a small shop so I make a few extra $$ from time to time. I also bale hay in the summer and sell some of it and that pretty much pays for the feed/hay I feed to my animals so I come out about even
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top