the pto on Charlie is locked up when i put the pto in gear it bogs the motor down. How hard is it to take the top deck off to get to the trans and see whats going on.
i had a H that did somthing like this; a bearing came apart and one of the rollers got into a tooth. then the gears meshed, it bogged down the motor. as long as the clutch was in everytings ran. but that was a long time ago
bass
i had a H that did somthing like this; a bearing came apart and one of the rollers got into a tooth. then the gears meshed, it bogged down the motor. as long as the clutch was in everytings ran. but that was a long time ago
bass