Fuel gauge

boomer22 · Apr 22, 2015

I ordered a fuel gauge off ebay. I just received it tonight and it is identical except it has the post type connectors on it and mine were the spade type. Really can't see any difference it will make other then changing the wire ends. Am i correct on this or is there something different about it?

Sorry forgot to mention it's for my 706 diesel.
Thanks

Phil Tibbetts · Apr 22, 2015

The only thing that matters is the ohm range and most fuel gauges are the same range. The terminals make no difference.

Jim Becker · Apr 22, 2015

Easier than changing the connectors on the wires. There are no doubt multiple sources, just found this using google.

http://www.repairconnector.com/brass-male-250-tab-with-no-10-mounting-hole-pack-of-5/

mkirsch · Apr 23, 2015

Heck, no need for specialized connectors or any cutting. Just crimp the right spade end on a short piece of wire, and the right eyelet style on the other end. Slip a piece of heatshrink over the spade joint or wrap with electrical tape. Done-done.

boomer22 · Apr 23, 2015

thanks for all the help. I was hoping it would be this way.

Fuel gauge

boomer22

Member

Phil Tibbetts

Well-known Member

Jim Becker

Well-known Member

mkirsch

Well-known Member

boomer22

Member

Similar threads