1066 and 706 hyd filter

FarmallZach · Apr 21, 2015

So I need to change both tractors hydraulic filters. I have never done them before and was just wondering how much hytran I need to buy to replace. How much will come out when changing both of them?

thanks Zach

Allan in NE · Apr 21, 2015

Couple of gallons.

Allan

fastfarmall · Apr 21, 2015

Check with your owners manual, but i think the hy tran is recomended to be changed every 1,000 hrs or every two years.

DeltaRed · Apr 21, 2015

couple gallons each.Buy a 5 gallon pail.Then you will have extra for later.BTW,do not try to reuse what comes out,it has dirt in it......

Mark in Upstate · Apr 21, 2015

I believe there is 17 gallons minimum in each plus a couple extra for good measure.

DeltaRed · Apr 21, 2015

Yes,17 gal.But only a small amount will 'escape' during filter change.If changeing the oil,just pour in a full 20(four 5 gal pails) gallons and forget it...Very common to add 5 gallon(22 gallon total) over full on those tractors.The steering,brakes,etc seem to work better.

Owen Aaland · Apr 21, 2015

Normal filter change oil loss would be less then a gallon. However, if the transmission is overfilled most of the extra oil will also come out with the filter.

Mark in Upstate · Apr 22, 2015

Sorry Steve,
Old school says that changing filters and oil at the same time.
Way I was brought up regardless of cost. Less expensive over the long haul.
BTW, enjoy all your posts!
Mark

1066 and 706 hyd filter

FarmallZach

Member

Allan in NE

Well-known Member

fastfarmall

Well-known Member

DeltaRed

Well-known Member

Mark in Upstate

Member

DeltaRed

Well-known Member

Owen Aaland

Well-known Member

Mark in Upstate

Member

Similar threads