unioncreek
Member
I replaced the belt on my M about 10
years ago, got it from the IH dealer.
It was loose when I put it on, but never
affected the cooling. I did arrow the
pulley up so it gripped. I noticed a
couple days ago after rebuilding the
head and getting it running that it
would only turn the fan very slow. My
question is can you get a shorter belt?
I haven't taken it off yet to measure it
to see if it's the stock belt.
Bob
years ago, got it from the IH dealer.
It was loose when I put it on, but never
affected the cooling. I did arrow the
pulley up so it gripped. I noticed a
couple days ago after rebuilding the
head and getting it running that it
would only turn the fan very slow. My
question is can you get a shorter belt?
I haven't taken it off yet to measure it
to see if it's the stock belt.
Bob