Fasthitch points

Both the 240 and 340 and everything larger are sized for the 3" large points. You can still use small point implements using the 1/2" thick plates in the lower part of the fast hitch sockets on the large point tractors. This is true for both the Farmall and International Utility models, Hal.
 
That's what I was afraid of, couldn't remember for sure, There's a farm sale coming up with 5 fasthith implements, I got a Super C. I might go anyway and see what they sell for, it's only about 15 miles away.
 
Remember if the equipment was for the Farmall 340 some or all of it could have small points as it could be used on the 340 with the spacers. Any of the equipment or implements that have the small points are sized for your Super C - would certainly be worth a 15 mile drive, Hal.
 
A torch will make them small , just slice 1/2 inch off the under side , or buy and trade one of us .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top