Zenith Accelerator Pump

IAtractorKid · Jan 20, 2015

Anyone know which notch the accelerator pump should be set to on an IH 606 (C-221 engine)??? Took mine apart before I knew there was a length adjustment there and now I dont know where it should be set. Thanks!

pete 23 · Jan 20, 2015

This is one of those situations that, like they say, falls between the cracks. Since it was a service replacement carburetor for a 460 there was no service manual printed with specs for it to my knowledge. Then, as the engine is the same on a 606 as a 460 the reference for repairs goes to the 460 manual, so one working on them is just plain left hanging. I'm not 100 percent sure there is no IH manual covering the carburetor, but in all my years of being the guy who filed all of the service bulletins and manuals during that period of time I have no recollection of any. I would put the accelerator pump in the middle position and go from there.

IAtractorKid · Jan 20, 2015

I thought that may be the case. I'll just have to play with it and see if I can't figure it out. Thanks!

Zenith Accelerator Pump

IAtractorKid

Member

pete 23

Well-known Member

IAtractorKid

Member

Similar threads