advice on pulling bn brake drum drivers side

gerrybn · Jan 14, 2015

Hi i am getting back into working on my nov'41 bn and have changed brake band and seals on one side but stuck on drivers side. i take it the drum comes along the shaft (ie towards trans) to remove. special puller or hammer? i dont want to damage it. thanks guys. Gerry

mkirsch · Jan 14, 2015

It should be exactly the same as it was on the side you were able to get done.

gerrybn · Jan 14, 2015

so once i had removed the diff shaft housing and undone the brake drum screw it comes off the same. Ok thanks for confirmation.

teddy52food · Jan 14, 2015

The brake is out on the end where the rod goes in not next to the diff.

gerrybn · Jan 15, 2015

correct and as its nearly the same I wanted to check. thanks.

gerrybn · Jan 15, 2015

Drum has been removed and cleaned with a new seal and new brake band added. all now back together. thanks.

advice on pulling bn brake drum drivers side

gerrybn

New User

mkirsch

Well-known Member

gerrybn

New User

teddy52food

Well-known Member

gerrybn

New User

gerrybn

New User

Similar threads