Super MTA hood?

Ellis, worst case you can get a md hood and weld the exhaust and starting tank hole closed and drill exhaust hole on left side. The md hood and mta gas hood are the same length. Just a thought. Jim
 
I may have both hood and grill. Both "perfect". I have a SMTA with a stuck motor that I'm considering parting out.What are they worth?
 
I don't have a clue what it is worth. Mine has been slightly bent right on the horizontal rib that runs the length of the hood. Most people don't even notice it, but it bothers me. I can't figure out how to fix it. I know you are in Colorado so shipping might be prohibitive. Want to trade plus some boot so you still have a hood? Ellis
 
Ellis,that is a possibility. I need to get it home and checked out before I make any 'rash' decisions. Steve
 
(reply to post at 01:17:59 12/10/14)
I've seen hoods go anywhere from $100-200. And they are coming mostly out of the Midwest.
& Red if you ever decide to get rid of that tractor give me a shout. (530) 844-2122
 
Any good auto baody shop could probably repair your bent hood. Take it into a couple for an estimate.
 
I have 5 Super MTA
2 units using as a parts machines give me a call, on the hood will consider selling some complete units Bill 952-913-0667
 
(quoted from post at 21:42:12 12/10/14) I have 5 Super MTA
2 units using as a parts machines give me a call, on the hood will consider selling some complete units Bill 952-913-0667
Where are you located at Bill?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top