Proper lift control adjustments help

Anonymous-0

Well-known Member
So I recently took my draft lever and position lever off to reseal the housing behind it. I read in the book how to adjust/set the draft control, but how do I set the position control as the internal parts can move more than the lever is allowed. hope this makes sense. to me it makes sense to put in the lowest(forward) position and leave it, or do I need to pull it back a little for the lowest position? I should have seen how it was before I tore it apart but as I have found with other stuff on this tractor it was't right to begin with....... thanks in advance
 
Is this the 656 I seem to remember questions about? There should be an indexing mark on the splines and lever inside, hard to see though. I don't know how to explain how you hook it otherwise. With hitch all the way down, the internal mechanism should just contact the spring loaded action control piston linkage with lever at the offset in the quadrant.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top