Farmall 300 exhaust and intake

brianhouchins · Nov 8, 2014

looking for some information about the torque setting and the tightening sequence for installing the intake/exhaust manifold on a Farmall 300 any help would be great.

Nebraska Kirk · Nov 8, 2014

The torque spec is 53 ft/lbs. there is not a special tightening sequence.

rustyfarmall · Nov 8, 2014

(quoted from post at 07:06:28 11/08/14) The torque spec is 53 ft/lbs. there is not a special tightening sequence.

No, there is not a recommended tightening sequence, but I like to start in the middle and work in both directions to the outer ends. It just seems right.

DeltaRed · Nov 8, 2014

That's how I do it.Most things like that I tighten
from the center out,usually in two (or more) stages.

Farmall 300 exhaust and intake

brianhouchins

New User

Nebraska Kirk

Well-known Member

rustyfarmall

Well-known Member

DeltaRed

Well-known Member

Similar threads