39' International D 15

Hello ! First time posting here for me. I have a friend who has a D 15 that needs Brake Cylinders, could someone help me find a decent set for him. He is going through a total restoration and found these to be bad. Thanks for any help!

Mike
 
There are a few places that deal in IH truck parts. One is Dick Vance aka pappy Vance in Hannibal Mo. He advertises in Hemmings motor news. Another is the scout connection. They advertise in Red Power magazine. I had a 49 kb2 a few years ago.
 
Thanks for the info guys, didn't even think when I posted that it was for his truck !! Normally post on CASE forum, so just went to this site. Will look into those sites, and continue to see if anyone else posts.

Mike
 
I've had good luck with getting them sleeved...Are the cyl's the pistol type ? Sleeving is your only hope.
 
why not just bore the cyl. to the next size thats avaiable -- if it is 1 and a sixteenth go to one and an eighth ect ect -- a machine shop should be able to do this for you -- good luck -- Roy
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top