I have a W450 with a t/a. Going to change engine oil, tran & diff, pto oils. The t/a housing, trans/diff looks a lot like my 560D IH which has hy-tran in it. Is the t/a oil transfered back & forth with the tran/diff? The t/a just grinds while pulling the lever backwards. Im assuming its in to be spilt to fix, but that project done the road. So would I be safe in putting hy-tran in the t/a housing? 80w90 in the tran/diff/pto housing? The 450 is abit odd to me, as have 80w90 in the H tran/diff, 80w90 in the SW6, hytran in the 560D. Thanks for any info, I tried searching. Didn't come up with info Im looking for.