New to me IH 606 - Pics Questions

Hey guys! Technically its my sisters, but I have it for now to fix up a few things. Anyway what do you guys think? Almost new tires all the way around, rear weights and fluid (rims are rusty but still solid), 2pt with 3pt conversion, tire chains, IH 2000 loader with all new hoses. Runs great but needs carb work...keeps flooding out and dying. Clutch is good and T/A works. Brakes need work. Needs new spindle bushings, Hoping the spindles are trash. Gauges work, lights don"t.

First question (manuals on order!), what is on the carb where the load jet should be? It has a wire coming out of it but its not hooked to anything and I don"t see any wires close that should be going to it. Secondly, what are the setting for this carb?

Lastly, what do all the letters after the serial number mean?

Thanks!!!
a169032.jpg

a169033.jpg

a169035.jpg

a169036.jpg

a169037.jpg

a169039.jpg
 
The device on the carb is the fuel shut off solenoid. It is powered by the ignition switch. Key on=solenoid open and fuel flows past. Key off= solenoid off and fuel is blocked by the tip to starve the carb so the engine doesn't have fuel to enable dieseling after the ignition is turned off. Most of my carb solenoids have the tips nipped off because the solenoids have failed, or were stuck in the the off position at some time. --Lee
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top