Push Rods for C-113 (Super A) - Have Question

RTR · Sep 1, 2014

What size are the push rods on a 1950 Farmall Super A ? I have some spare push rods in the shop but don't remember what they came out of. I have only worked on a Super A, 100, and 140, so those 3 are the only possibility.

I think the push rods are a different size on the 100 and 140, so I was wondering what size they both are (diameter and length) so I can tell which ones my spare ones are. Online parts book didn't say.

THANKS!

RTR · Sep 1, 2014

(quoted from post at 03:33:19 09/02/14) What size are the push rods on a 1950 Farmall Super A ? I have some spare push rods in the shop but don't remember what they came out of. I have only worked on a Super A, 100, and 140, so those 3 are the only possibility.

I think the push rods are a different size on the 100 and 140, so I was wondering what size they both are (diameter and length) so I can tell which ones my spare ones are. Online parts book didn't say.

THANKS!

OK.....so I got a pushrod off the shelf and measured it to be 11 3/4 inches. I'm gonna guess and say that is a Super A pushrod and that the Farmall 100, 130, 140 (C-123) pushrods are a little longer???

Exact dimensions of each would be nice so I can tell what I have and what to look for in the future.

Owen Aaland · Sep 2, 2014

That series of engines (C113, C123, C135, C146 and C153) have three different part numbers for the push rods.

47 386 D
357 548 R1
360 213 R91

All three part numbers are interchangeable.

Push Rods for C-113 (Super A) - Have Question

RTR

Well-known Member

RTR

Well-known Member

Owen Aaland

Well-known Member

Similar threads