farmall H umbrella bracket

Can anyone tell me if international made a factory umbrella mount for an H farmall . also would a good place to mount an umbrella be on the steering post. Thanks Scott
 
They did not have any but lots of others were availale. If you have the friction throttle one on the steering post will work.Most did mount there.
 
I made one out of a piece of galvanized pipe that fit over the upright. Mash the bottom end flat and bolt it to the axle bracket that the drawbar fastens to. Drill a small hole through all of it for a small bolt to keep it from turning. LE
 
Mine is mounted along side of fender (this is on a 450) but also should work on H or M. I wll see if picture will load.
a161588.jpg
 
Take a look at this one. It's off my 'M'. I'm thinking it would work for your 'H'. I'll sell it cheap.



Best regards
Patrick
'49M
 
Dad cut a hole just a little larger than the umbrella in a block of wood and mounted it to the light bar right in front of the steering wheel. He then mounted a bracket on the deck below the wood block to hold the bottom. Easy to take off and on, and easy and cheap to make. This was for a straight pole umbrella.
 
Patrick, can u give me a lenght an thickness on this
bracket I have a 49 H don't know if it would fit on
the steering post or not I have a starter switch and
light box on mine. I live in MO if u would give me a
price and we can go from there. Thanks Scott
 
Yet the same people who do that complain about the visibility through the windshield of a soundgard cab.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top