James,

Id have to look to be sure, but I think its in the parts manual. Im pretty sure its a 133 Lhaed, but the exact model of the engine escapes me at the moment. Ill look when I get home if you dont get your answer sooner.
 
It was originally a BD-1 engine made by Fuller Johnson; When Fuller Johnson went into bankruptcy, Waukesha bought them out and renamed the engine FL. It was a 3x4 engine at 113 cubic inches. Later, Waukesha up graded the engine to 133 cubic inches, changed the mains, and called it a FC.

http://www.wehs.net/connection-1-fuller-johnson.html
 
The engine is a 113 cub inch Waukesa Flat-head (or L-Head, i.e. side valve) model FL engine. The parts numbers for most of the FL engine are the same as the Fuller & Johnson BD-1 engine that was built for IHC to put on the model 20 and 21 Harvester Threshers. The parts that are different are the head (the harvester engine had the radiator over the flywheel with the fan driven by belt off the flywheel) and the front cover on the timing, governor and magneto drive gears. This engine was fitted to the first 2500 F-12 tractors except 10 at about number FS-600 to FS-609 where IHC tried their own new 113 overhead valve engine which became the standard engine for the F-12 and the other 12 series tractors. There was also a small number of F-12 tractors fitted with a Waukesa engine with replaceable sleeves
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top