Brady Miller
Member
Gents,
I was pulling a land lever with my m, I beared down on the hydraulics and hit the end of the hydraulic stroke, the motor snuffed out.
When I tried to restart, it just turned over. Thought it was electrical, replaced all electrical points rotor cap condenser coil. No start
Got the compression tester and run it one time, here's the bad news-
1-75#
2-0#
3-0#
4-25#
I figure it's a broke cam.
Engine has 15 hrs or so on overhaul. I am sick and going to have a beer to ease the pain.
I thought to pull the tappet cover first
Let me know your thoughts
I was pulling a land lever with my m, I beared down on the hydraulics and hit the end of the hydraulic stroke, the motor snuffed out.
When I tried to restart, it just turned over. Thought it was electrical, replaced all electrical points rotor cap condenser coil. No start
Got the compression tester and run it one time, here's the bad news-
1-75#
2-0#
3-0#
4-25#
I figure it's a broke cam.
Engine has 15 hrs or so on overhaul. I am sick and going to have a beer to ease the pain.
I thought to pull the tappet cover first
Let me know your thoughts