Anonymous-0
Well-known Member
Hello, I have an International 500 dozer,(not a C or E model) and I need a wiring schematic or directions to best place to get one.
The dozer works fine, but the previous owner wasn't much on up-keep, and at some point the wiring was ripped from the starter and alternator, etc,etc.
I don't want to keep shorting out the terminals on the starter to crank it.
All of the switches are there, just a lot of broken wires.
It's a diesel with a 6 way blade and reverser
Thanks in advance for any help and directions
Steve 10220
The dozer works fine, but the previous owner wasn't much on up-keep, and at some point the wiring was ripped from the starter and alternator, etc,etc.
I don't want to keep shorting out the terminals on the starter to crank it.
All of the switches are there, just a lot of broken wires.
It's a diesel with a 6 way blade and reverser
Thanks in advance for any help and directions
Steve 10220
