Calling owners of fast hitch Super C 200

Rex Simpkins · Mar 16, 2014

I am working on the touch control of my fast hitch
Super "C". The Auxilary Control Valve is #
356782R1 as shown in TC-53B page 235 (parts
catalog for 200)but I can not find the gasket to
mount the valve to the touch control block. It is
a gasket similar to the standard gasket used on
standard tractor without the valve but has a
different relief cut-instead of a horizontal
relief cut in the gasket the one I need has a half
moon shape relief cut in the gasket. Somewhere
along the line they made one because I ripped the
old one getting the valve off.

Farmallhal · Mar 16, 2014

Rex, Look on page 237 of your TC-53B parts catalog as there is a gasket shown (356803R1) which isn't identified with a reference no. which might be the one required. Since the auxiliary control value isn't shown in an illustration attached to the touch control unit there isn't a place to show the tractor attaching items including the special bolts for the valve. In looking back at my part invoices when I restored my Super C several years ago with an auxiliary valve and fast hitch I see I obtained a 356803R2 gasket for $3.96 from the CaseIH dealership which is most likely is the item you are needing. I don't recall where that part was used but I went through the entire hydraulic system during the restoration and I'm guessing this is probably the gasket you are looking for, Hal.

Rex Simpkins · Mar 16, 2014

Once again you are the guru. Thanks Rex

gene bender · Mar 16, 2014

Since you have a tractor you need to get some gasket material then its easy and quick to make your own its not that expensive to have three types of it then you can make your own saves time having not to go to a dealer ect and then order and then another trip to get it. I make my own except a head gasket easy to do.

Calling owners of fast hitch Super C 200

Rex Simpkins

Member

Farmallhal

Well-known Member

Rex Simpkins

Member

gene bender

Well-known Member

Similar threads