460 power steering line

Take the old one to someone who builds hyd hoses, tractor dealers, auto parts stores etc. They can put your ends on a new hose.
 
Those are steel lines, Swagelok tube and some fittings will do it.


mvphoto21207.jpg
 
For steel lines, take it off, and silver solder it back together. With the price of the solder you might be better off taking it to a welding shop.(most of the ones I know would not charge a FFA project.)
 
(quoted from post at 22:53:13 10/04/13) This is for a FFA tractor restore and raffle need it to look good

Why don't you say what is wrong with the line, maybe you can get some better answers.

I think the stainless swagelock looks just fine.

When I get some time I may make all new lines. They have all the ends and adapters.

I just repaired someone else sloppy leaky repair to get back in operation.
 
(quoted from post at 18:53:13 10/04/13) This is for a FFA tractor restore and raffle need it to look good

Well, you either hunt down a good used one off a parts tractor, or you get one custom made. Those are your only choices.

I don't know why a shiny new hydraulic hose won't look good. It won't be "correct" but it will look good.
 
(quoted from post at 21:56:01 10/05/13) We don't have the original some one already had put a rubber line on it. I will try Bates

If you can't find one I am sure that a good shop can bend one to fit.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top