MW C263 Rings

d282 · May 24, 2013

I just opened up my new to me 560 gas I bought from the scrap yard. My pistons have 5 rings and the bore is a hair under what the IT book says: 3.506?? and I have 3.450. I do not know what the M&W specs are (if they are the same as IH) or if they really pressed the sleeves in making them a tad smaller. I was hoping to clean up the sleeves and re-ring the pistons but can not seem to find a set. Does anyone have any ideas? A compression test before tear down was 115-125. Thanks

Bob · May 24, 2013

Try checking with Dave Reed.
Rings

CNKS · May 24, 2013

I don't know what M&W did but the factory sleeves for a C163 are 3 9/16.

Earl-IL · May 25, 2013

What is the piston number . I have a M&W book they had a std. 3 9/16, 3.5625 and a 3 3/4, 3.750 set. Hastings has rings available.

nosih · May 25, 2013

We do have NOS M&W piston ring sets available for the 3 9/16" piston &sleeve sets

MW C263 Rings

d282

Member

Bob

Well-known Member

CNKS

Well-known Member

Earl-IL

Well-known Member

nosih

Member

Similar threads