So 2 years ago our IH 584 got water in the oil so we decided to do a complete rebuild with the engine. 2 Years later, we completely rebuilt the engine with a master rebuild kit for the block and head from Red Power. When we put the engine together, we torqued everything down and waited over night and re-torqued everything. Then when the engine was together, we filled the radiator with water, the oil pan with fresh oil, rolled the engine over to circulate the oil and let it sit over night. The next day, we hooked up the injectors and nothing was in the oil so we got it to start. We ran the tractor in the garage for a few minutes on idle and let it sit over night. The day after we started it up to move the tractor to the front of the garage to fix a tire, checked the oil and there is water in it. Any suggestions?