IH 27v mower mounting plates for M Farmal

Raltn · Apr 30, 2013

Any one have the specs/measurements for the plates to mount a 27V mower to an M? Or if you have a set to sell that would work fine too. As always thanks for all the help you guys and gals dish out!

Ol' Gimpy · Apr 30, 2013

I should have both of them,but don"t know when I"ll be in the rear the mower is stored right now. By any chance,did you have a IH dealer check for these plates at "The Depot"? 25-V plates are the same too. You have all the other parts,or has the lift cylinder bracket been welded to the frame,as so many have?? Drop me an email and I"ll see what I can do to help you.

Big Fat Herb · Apr 30, 2013

The old book I have on a #27-V shows the plates the newer book on# 27-VA just shows the bar with all the holes mounting on top of U hitch on an M

gene bender · May 1, 2013

Two pieces of 1/2x3 and some holes and you will be good to go.

IH 27v mower mounting plates for M Farmal

Raltn

Member

Ol' Gimpy

Member

Big Fat Herb

Member

gene bender

Well-known Member

Similar threads