Went and looked at it today. The gear box is noc and tight, along with the plunger connections. No excessive wear anywhere on the machine. The blade on the plunger was somewhat sharp bu looked like he'd ground on it with an agle grinder. They had a stack of bales it had baled last year - the only issue seemed to be they were pretty loose.
The owner wasn't there so I don't know if he has a manual. I agreed to $700. Anything specific to that baler that can cause me serious problems?
The wire is probably a couple years old (4 rolls) but is under a roof. Do I need to start with new?
The owner wasn't there so I don't know if he has a manual. I agreed to $700. Anything specific to that baler that can cause me serious problems?
The wire is probably a couple years old (4 rolls) but is under a roof. Do I need to start with new?