(800) 853-2651
SHOP NOW

Super M put to work

F

Fullers Farmalls

Member
Thought you guys might enjoy seeing the Super M pulling three bottoms. Fluid in the rears made a world of difference, need a landside tire chain and it woulda pulled in the wet soil but i used the Ford with chains to finish everything else.
a107794.jpg

a107795.jpg

a107796.jpg
 
It's going to take a lot. I only made maybe 10 passes and they were
150yards long. I will do all the plowing in the fall with it and get
them all cleaned up.
 
2 wheel weights per side on those rears would do wonders also.


I know it sounds good with you new stainless exaust sysem. :)
 
I love that stainless exhaust. Wish I had a taller garage so I didn't have to take it off all the time. Will be building a garage this summer that is 14 feet high at the doors. Much needed...
 
On the line instead of taking the M parts out of the supply chain and putting the SM parts in, they put the SM parts in as the M parts ran out. The "stages" are how some people refer to the new parts coming onto the production line.
 
You must log in or register to reply here.

Similar threads

jd2cyl1943
The story of my Bs restoration up to this point.
Replies
6
Views
863
jd2cyl1943
jd2cyl1943
jd2cyl1943
Here's the story of my JD Bs restoration up to this poi
2
Replies
26
Views
2K
jd2cyl1943
jd2cyl1943
I
Sudden loss of battery power to starter after changing batte
Replies
0
Views
205
ITW PLAYER
I
A
Need advice 2N purchase
2
Replies
27
Views
3K
Caryc
C
Z
New Member - First Time Tractor Owner - TO-30
Replies
12
Views
913
Genelotta
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top