wheel weights

Kinda...the bolts will fit in the key holes on letter series Deeres...BUT...they stay out in the wide part and dont slide down in the slot, so ya have to back 'em with something. I have seen guys do it with big washers, but ya wanna make sure you use a few cuz I saw a guy who used one and when a couple of bolts loosened a little the washers sucked through the holes. Here in my area, IH weights are very affordable, while JD weights are very expensive, so we use mainly IH weights when we go pullin or need to add some weight for plowing and such...I had some 3"x3"by1/4" aluminium plates made with holes in the center...they line up nice on that flat part on the inside of the JD wheel centers.
 
Rick, after I answered you I scrolled down to the Deere forum and saw this pic...gues they work on the number series also huh? LOL Interesting pic too cus I didn't ever realize that my ABG snowplow would go on our 70 either! Pete
a105755.jpg
 
(quoted from post at 01:46:48 03/08/13) Rick, after I answered you I scrolled down to the Deere forum and saw this pic...gues they work on the number series also huh? LOL Interesting pic too cus I didn't ever realize that my ABG snowplow would go on our 70 either! Pete
a105755.jpg

Those are Deere weights on that John Deere.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top