|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: Aint had much time to get on here
[Return to Forum]
| Author |
[Modern View]
|
| The tractor vet
02-21-2013 15:44:45
75.19.115.148
|
Done got involved in a major trans plant to bring new life to a DOA horse .Last fall just after we were all done with the corn my one close friend and i went on a short road trip to fetch a 2150 Oil ALL OVER that was DOA . What a fun job that was tryen to get it moved out the holes it had sunk into from setting DEAD for like ten years WITH the brakes set . We had the use of a 410 Deere backhoe and it would not dead pull it and usen the hoe we made four chains out of two . Till we beat the brakes off . We loaded it down hill and got it up on the trailer and i want to tell ya it is one heavy INGOT as My buddy's Dodge Cummins high out put and six speed had all it wanted . Well we got it in his shop after i finished up the 460 and we got into that 478 herc. and found that she sucked #6 sleeve down and made lots of spare parts in the pan. We could have sleeved it and bored it back to Std. and done a total rebuild and had it up and running ,But after pushen the pencil around and getting prices i told Vernon WHY don't we just put a Cummins in it. Well that is what we are doing , it is getting a 8.3 cummins and other then motor mounts that we have to make up and make a fan hub up to raise the fan up about 4 inches this is a BOLT IN DEAL . we found a Industrial 8.3 WITH the correct rear engine housing that is a direct bolt to the three speed got the correct flywheel that will take the stock clutch and the PTo drive , i love it when a plan comes together . I had talked to one guy that is suppose to be the GURU of these trans plants and he was the most arrogant SOB that i have ever run into and he told me that he would do that job as HE was the ONLY one that knew how to do it and HE was the only one that had the parts to do it with. NOT he wanted 22000 us, even with my labor around 7 grand . I am having way to much fun on this job to the point it should be Illegal. |
|
|
|
| IlliniJohn
02-21-2013 20:16:55
173.26.154.98
|
|
Re: Aint had much time to get on here in reply to The tractor vet, 02-21-2013 15:44:45
|
|
| TV, sounds like fun. Hey, how bout some photos?Take care! John |
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|