Draw bar 300 U

wes in ohio · Feb 20, 2013

Anybody have a suggestion or pics of a good mount for a heavy duty draw bar for a 300 U

Zachary Hoyt · Feb 20, 2013

With or without a fast hitch?
Zach

Zachary Hoyt · Feb 20, 2013

With or without a fast hitch?
Zach

wes in ohio · Feb 20, 2013

I have the draw bar that goes in the fasthitch, I"m looking to make one that mounts underneath so I can have my 3 point linkages in the fast hitch, but can still have a drawbar, without dragging alot of heavy iron around.

Zachary Hoyt · Feb 20, 2013

I am familiar with pictures of a swinging drawbar that mounts under the tractor and rides from side to side on the fast hitch drawbar on a Farmall 300 but I have never had an IH 300U. If you want the drawbar to be completely independent of the fast hitch I do not know how that would be done on your tractor. I would take a look underneath and see what your options are. I would think you could fabricate something that would bolt to the bosses where the fast hitch mounts and use longer bolts to secure both, but it would be a pretty large project to get everything to line up. I am sorry not to be able to help.
Zach

504 · Feb 20, 2013

I believe the one we had W.O. the fast hitch, the draw bar was mounted like the Ms and Hs. Mounted to the axle, just had shorter vertical arms. Maybe something built to bolt to the axle, and then narrow in to clear the lift arms.

Draw bar 300 U

wes in ohio

Member

Zachary Hoyt

Well-known Member

Zachary Hoyt

Well-known Member

wes in ohio

Member

Zachary Hoyt

Well-known Member

504

Well-known Member

Similar threads