Rear main retainer plate plugs

Replaced the rear main in my super H today but I have one question. On the bottom retainer plate that bolts to the block I removed two felt plugs, I have the new ones whitch are rubber with a hole in the middle of them. Should the new plugs fit up in the block flush were the oil pan seals to it or should it be left down alittle so when the pan is installed it will compress them? Thanks
 
Sounds about right. I did trim mine slightly before installing. Those rubber plugs compress a lot harder than the felt ones.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top