404 Pistons

I am looking for pistons and sleeves for a 404 international. I made a post a few weeks ago and gave some bad information. Now I have it all together! The pistons I am looking for are for a C135 engine from eng. sn 100501 and up. I have tried seven places and they took my order only to refund the money and tell me that they couldn't get the parts. Can anyone tell me where I can get the parts or at least tell me what the difference is between the old and newer model pistons? I have a lot of money in this engine and don't want to give it up. I really need some help here.

Thanks in advance,
Mark
 
Have you tried Hy-Capacity. They list them for that serial number and above. I would have checked their stock but if it gets mixed up I might be getting parts and I don't need that. They list for $156 a hole. You will have to work through a Hy-Cap dealer but most independent shops and a lot of imp dealers also work with them.
 
I have NOS piston & sleeve sets in the style that you are looking for. Email me, and I will provide a pic of the piston.
 
Thanks Pete,
I just checked with Hy-Capacity and they are showing up to s/n 100500. I need from s/n 100501 and up. I may not be doing something right since I have never had any dealings with them. I'll check further in the morning.

Thanks again,
Mark
 
Just wanted to say thanks for effort but they were one of the venders that refunded my money. Thanks for the reply I really appreciate your input and time.

Thanks,
Mark
 
Hy-Cap shows a set FROM 100500. I read that as >. Probley have to call and check. This site shows from 100501>. Or I miss read which you need, if so, sorry.
 
Yes the serial number break is at 100500. The lower is one kind of piston and from 100501 forward is the other. 100501 forward is what I need. This site is showing 100501> and they as well refunded my money. I do intend to call Hy-Cap to check verbally just to make sure.

Thanks for the info. All is appreciated!
Mark
 
Here is a pic of an individual sleeve assy for the late C135
135bassy.jpg
 
here is a pic showing the difference between the late C135 piston (on left) and the early C135 piston (on right).
135vs135b.jpg
 
Hey Nosih I am also looking for a piston/sleeve set for a late serial number C135. Do you still have some available?

Thanks,
Justin
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top