Seals to replace packing

Mark Poss

Well-known Member
Is it possible to replace the packing with seals for the belt pulley shaft and the pto shaft on a 1932 F-30? Thanks for your time, Mark.
 
It probably is possible, but some machining will probably have to be done. You can new generic packing from McMaster Carr, either graphite or PTFE impregnated. Either one is pretty cheap. Since the sealing surface will be worn from many years of use, a modern oil seal may not seal very well. Whereas the packing is much thicker and has a better chance of sealing I would think.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top