Hi Guys!
I"m rebuilding a Little Genius plow.I am going to need some different moldboards,either NOS or used.Does anyone know of a parts source? Balsters and Crescent Forge and Shovel are out of buisness. Hope someone can help! THANKS!
JIM
 
Are the new owners making parts yet?

If so can you let us know what the prices are?

Barring that, you either have to find another plow with good parts on it, or convert the plow to Super Chief bottoms, which you can still get new parts for at the local CaseIH dealer, Tractor Supply, and many online sources.

Plows with good parts on them are getting harder and harder to find.
 
I suggest you get the Super Chief replacement bottoms since the wear parts are readily available. IH did not change the bolt up pattern from the beginning to now so the new Super Chief bottoms should replace your existing bottoms with no modification needed. My dad changed ours out to Super Chiefs back in the 1960's.
 
Jim,
I have some moldboards on hand, I think 2 of 14" and 1 of 16", Super Chief I think. Also 3 new shares.

I also have a one bottom IH plow and am thinking of pulling that moldboard (16"?) off and scraping the plow as it's left axle is bent and makes serious "toe in". All these parts are in really good condition.

I'm in Wisconsin, maybe that's too far for you to take a look? I'd need your phone number so we can go over details if interested.

LA in WI
 
Hi LA in WI!
Sorry it took so long for a reply. I would like to talk to you,I need 2-14" moldboards, part#03046. My phone# is 952-955-1492. After 6PM is best. THANKS! Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top