James 88

Member
what are some different motor options in this tractor.used some on farm; but will be pulling farm stock,open speed. thanks for time.
 
The pulling forum might be the best place for your question. It would depend what your tractor pull assoc. rules for stock farm state about engines.
Your 766 has a 360 CI engine. The next bigger engine is the 414 which is in the 966. You will need to make numerous changes to install the 414 in your tractor. it can be done but lots of changes. hope this helps. here's my 766 stock puller. Kent
a97147.jpg
 
The D360 can't be "bored out" to turn it into a 466 or anything like that, if that's what you're asking.

It's a miniature version of the 400-series engines. Similar design, smaller package. None of the parts are compatible.

If they let you change out injection pumps and add turbos, you can put the inline pump off a DT360 truck engine on it and get some nice torque rise.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top