MW Governor

Anonymous-0

Well-known Member
i just got a Supposibly m&w gov. the throttle shaft say M&W add power G-11, i popped open the cover and the numbers on the weights are, TG-5120. is this a true M&W gov.? thanks for the help.
 
(quoted from post at 19:23:03 01/15/13) If it is mw it has a bolt not a pin where it goes to carb linkage. At top

And 4 weights instead of 2.


Yeah, from your description of the tube and tag it sounds like an M&W


This is my SMTA. Sounds like yours.
MWGov001.jpg


This is my H.
MWGov002.jpg

MWGov003.jpg
 
thanks for the info, the inside of it has 2 weights,? hmm. i wonder if someone put a M&W throttle tube on a stock gov.?
 
Sounds like you have a 2 weight governor sold by M&W once. Pretty much made like a thompson governor. Picture not to clear but maybe you can see how the weight pins are retained and that they probably look like yours.
a96978.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top