SM Brake Help

Pete_5959

Member
Opened the brakes on the tractor I am restoring and what a mess. The stud (item 31) in parts breakdown needs to be replaced along with the both links and springs and discs and?...My question is on the pin. Is this item threaded into the center disk and then a jam nut to ensure it doesn't back out? Thank you for any advice.

Pete knee deep in a SM
 
Pete - If memory serves (it's been a while since I've been inside my SM's brakes), that pin is a loose fit through both plate actuating links and the yoke. It is retained in the yoke with a cotter pin.
 
Bob,
I am referring to the pin that goes through the "brake pressure plate" for better words. It secures the oposite end of the yoke assy.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top