Author	[Modern View]
Dalrymple 01-13-2013 06:18:33 68.159.102.215 Report to Moderator	I would like to have a correct hydraulic valve for my stage 2 1953 SMD. There's one in the photo ads under "Tractors" with heading "Farmall two way hydro valve". Can someone tell me if it's correct for my tractor, and if it's worth the asking price? I'm in no hurry to buy, would just like to grab one sometime. [Reply]   [No Email]
Dalrymple 01-13-2013 07:23:49 68.159.102.215 Report to Moderator	Re: Christmas tree valve in reply to Dalrymple, 01-13-2013 06:18:33   I do have the engine driven pump and battery under the seat. I think I can make the mounting hardware that goes inside the frame. There's a thread on here somewhere with pictures and a pretty good description of that. I would like to have all the correct stuff that is visible when it's all installed on the tractor. Maybe I'll pass on this one. Thanks for the info!   [Reply]  [No Email]
D Slater 01-13-2013 06:35:36 184.15.8.141 Report to Moderator	Re: Christmas tree valve in reply to Dalrymple, 01-13-2013 06:18:33   If it has the engine driven hydraulic pump? Mounting parts are missing and the rear line cover wasn't used with the battery box under the seat. If mounting on a belley pump I can't tell if the half union or pipe tee is there from the picture. Forgot to say the top support brace for the valve pictured is for a H or stage one SH. Probably its off one of them. This post was edited by D Slater at 07:05:46 01/13/13.   [Reply]  [No Email]