Char Lynn question

notjustair

Well-known Member
When I worked over the Char Lynn unit on my M I had NAPA match the orings. Well, you can guess how long they lasted.

Anyone have a source for the two small end orings?
 
Teflon based Orings in several hardness levels are readily available. Google PTFE Orings and shop.
PTFE stands for Polytetrafluoroethylene (Teflon)
An Oring of teflon will be good to go. Jim
 
What are using for a coupler between the TG and the lower shaft? Is it a solid coupler , or does it have the side to side and end to end movement? If you don't have the proper "wobble" coupler that is your problem.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top