Farmall 560 more progress PICTURES!!!

It's looking like one more day of painting, then touchups. Unfortunately the IH cream was the IH white like the 1066...
a95408.jpg

a95411.jpg

a95412.jpg

a95413.jpg
 
What kind of paint and spray gun are you using? are you doing a flash coat, double coat and finish coat? It looks a little dull and thin.
 
Paint is some quality automotive stuff. Montana paint with an epoxy primer and surfacer. I'm using cheap Northern Tool guns. Which have served me well on two other tractors, a plow, a manure spreader and a trailer. The sheetmetal pictures were taken after just one coat. Also take into account I am only 18.
 
Daang ... I wish I had access to such a nice shop area like that....it's gotten cold here in the midwest.

Nicely done Farmallboy. There's nothing better than a shiny and true to manufacture tractor. Red just works for me.



(quoted from post at 05:55:47 01/04/13) It's looking like one more day of painting, then touchups. Unfortunately the IH cream was the IH white like the 1066...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top