Dave OBrien
Member
Anyone else out there have trouble keeping the latches in the lift arms? The springs seem good and the bolts are tight.
- Thread starter Dave OBrien
- Start date
the tractor vet
Well-known Member
Remove the latch springs and turn them upside down and see if that helps, If that does not help check the latch for any roundness to it as they must be flat and square .
Janicholson
Well-known Member
The vets comment on the flat and square is important. Welding them up with Nickle rod and grinding flat will help. as will looking at the prong notches for rounding. (same solution)
Jim
Jim
Rumplestiltskin
Member
Dave:
If by chance you're using the smaller fast hitch prongs and the larger sockets, make sure your filler plates are still in place in the sockets. If not, the prongs won't latch. Don't ask me how I know.
Mark W. in MI
If by chance you're using the smaller fast hitch prongs and the larger sockets, make sure your filler plates are still in place in the sockets. If not, the prongs won't latch. Don't ask me how I know.
Mark W. in MI
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy