I have an opportunity to have a few sleeve removal pucks made at a very reasonable price. I'd appreciate help regarding dimensions.
It appears that the block bore and sleeve OD at the seal for two engines I'm working with at the moment is 3 7/16 (3.4375).
Question 1: What should be the "outer" diameter of the puck?
Question 2: What should be the "inner" diameter of the puck for:
3 1/4 bore sleeves?
3 1/8 bore sleeves?
3.1875 bore sleeves?
Question 3: How thick should the "steel" puck be from the bottom of the puck to the cut for the "inner diameter" of the puck?
Thanks.
It appears that the block bore and sleeve OD at the seal for two engines I'm working with at the moment is 3 7/16 (3.4375).
Question 1: What should be the "outer" diameter of the puck?
Question 2: What should be the "inner" diameter of the puck for:
3 1/4 bore sleeves?
3 1/8 bore sleeves?
3.1875 bore sleeves?
Question 3: How thick should the "steel" puck be from the bottom of the puck to the cut for the "inner diameter" of the puck?
Thanks.