Farmall 350 Utility, Loader won't go up or down, no power st

Anonymous-0

Well-known Member
I have a Farmall (IH)350 Utility tractor. It has no power steering and the loader won't raise , however the bucket tilts back and forth!
 
What about the power steering? Both aren't working, the loader up and the power steering? Are they both on the same circuit?
 
I would first check the single or double acting controls on each hydraulic lever. These are on the end opposite the lever. they are a roll pin through a milled flat. the roll pin must be either in the D position for two way action or S for single acting cylinder control. If these have been bent, it the little tin guard over the pin is distorted, they will cause issues. Let us know what you find. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top