I just picked up an IH Windbreaker for free that was used on an International 3088. I"m wondering if they are a "one-size fits all" kind of thing and if it will work on a Farmall M. Since I don"t have any money in it, I won"t be too disappointed if it doesn"t fit. Thanks for the help.
- Thread starter MFan
- Start date
Janicholson
Well-known Member
Almost all canvas type systems can be customized to fit. Cut as needed and pin together with "T" pins. Join with urethane door and window sealer and let set for 24 hours. Brackets and hardware are usually adaptable to be sturdy. Make attachments rigid so that the components do not flop around. Also make sure the canvas does not get tangled or intrud into the pedals. Canvas used under the tractor to "close the bottom is often very helpful in keeping you warm. Jim
Why dont you just "throw it on"?That way you can find out,cut,trim,adjust as needed.I ran a HeatHouser from a JD 720 pony start diesel on my SM for years.Had to quit useing it when the shed it was stored in burned.If not for that,it would probably be on the SM right now....
Ultimately, no, they are not a one-size-fits-all thing. It was more like one-size-fits-some, another-size-fits-some-more, etc..
The 3088 version is likely much much larger than necessary for an M.
Like the other guys said, though, since it was free you've got nothing to lose by trying.
Really, it should work with minimal modification. I wouldn't cut the vinyl. I would figure out a way to gather it up to keep it out of the tires.
The 3088 version is likely much much larger than necessary for an M.
Like the other guys said, though, since it was free you've got nothing to lose by trying.
Really, it should work with minimal modification. I wouldn't cut the vinyl. I would figure out a way to gather it up to keep it out of the tires.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy