lo HP IH owner
Member
Ive found a c-146 with 379171r2 as the cast# on the block. Will the bolt up? It shure looks close?? Thanks in advance!!
- Thread starter lo HP IH owner
- Start date
Janicholson
Well-known Member
From Wikia (a information source on the web).
The International 424 replaced the International B414 in the US. The new model was still partially built in Doncaster, England but it was styled like American models, with a new grille made up of fine vertical and horizontal bars. The chassis was shipped to the US as a "skid unit" and assembly was completed in the Louisville, Kentucky factory. The gasoline version was shipped without an engine and the C-146 engine was fitted in the US. The C-146 was apparently based on the C-135 engine of the International 404 Utility tractor but with a 1/8" longer stroke to increase the displacement.
I cannot be sure the engine to trans bolt circle will match
Jim
The International 424 replaced the International B414 in the US. The new model was still partially built in Doncaster, England but it was styled like American models, with a new grille made up of fine vertical and horizontal bars. The chassis was shipped to the US as a "skid unit" and assembly was completed in the Louisville, Kentucky factory. The gasoline version was shipped without an engine and the C-146 engine was fitted in the US. The C-146 was apparently based on the C-135 engine of the International 404 Utility tractor but with a 1/8" longer stroke to increase the displacement.
I cannot be sure the engine to trans bolt circle will match
Jim
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy