Live lift pump replacement

I have a 400 that is set up for pulling but still has the hyd. pump on it. I want to take it off. I have looked at the part numbers for dist. drive for 400 and super M and the part number for mag drive and they are different numbers. I keep seeing these for sell on ebay and they say that they fit dist. and mag for M-450. Will they work or does it have to be for the 264ci dist. type?
 
Part you want is found on part of the 1950 M tractors and on up through to 450 tractors without a engine hydraulic pump. Most all have a number on them. You want the one for a M or SM non diesel with a number that ends in R1.
 
Eddie, looked at E.B. and item # 150939997077 has the housing # 354951R1 visible in the picture. That fits you.
Also saw one listed for H to 350 saying pullers needed it to replace a engine pump. Can see the housing # on it 6237D. That will only bolt to H up to part of 1950 models. Realy its a early housing before a oil seal was added to the shaft.
Housing # 354941R1 would fit in place of a pump on a 300 ETC..
Beware of E.B. listings of carburetors, distributors, ignition drives and other fit alls. Ask questions before purchase.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top