Bohn Super C
Member
Last fall I bought a 1954 Farmall Super C tractor and I don't believe the governor is working properly. I bought a 6 foot finish mower for the three-point hitch, and when I was using it this summer, every time I push in the clutch the engine revs way up high, so I've been pulling back on a throttle before I push the clutch in to get by for now. Also when I bring the throttle back down to idle it still idles quite fast, and I grab the link that goes from the governor to the carburetor to idle it down slower but then it usually stalls out. Also there is a fuel cap on the governor housing which I have not seen on any other Super C tractor. The cap on the governor housing reads buy clean fuel, keep it clean. When looking at the governor housing it it does not look like anything's been fabricated, that it was made that way from factory. Has anybody seen anything like this before?