Anonymous-0

Well-known Member
I have an old farmall h .Sitting on the seat on the right hand side there is a rod to engage the hydrulics. below it is a hydrulic fitting below it is a bolt in a hole does any body know what this hole is for
 
Interesting question.
I think the answer is a photo. There are several possibilities, but the answer will probably take a photo. There is no stock hydraulic fitting below the Liftall control rod as delivered from the factory. Thus our visualization is just not realistic. There are holse for the choke, and shutter control (usually empty) and that is about it. Give us a photo. (ask for permission from Kim (feedback to the lower left) to allow the picture. First posters are denied permission due to the posting of nasty material by opportunistic non contributors. Jim
 
Bolt is for mounting an implement. We used it for attaching a swing arm to operate the lift on a #27 sickle mower.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top