having problems bleeding inter 784

Anonymous-0

Well-known Member
hi have replaced some fuel pipes and filter but having problems geting it started cant find a bleed screw on the injection pump it has had a electric pump fitted can any one offer any help please thank you kind regards grahame
 
Hi, only bleed screws on top of filters. If you have an electric fuel pump attached should be easy to bleed the air out of the filters. Then put the Stop/Start/Run level in Start position, throttle about 3/4 open and crank engine with starter for no more than 30 seconds at a time, then let starter cool off, try this a couple time, if no go then loosen a couple injector lines at the rear of the injection pump and try cranking engine again.

Hope this helps
JimB
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top