|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: H Frame Rail Bolts
[Return to Forum]
| Author |
[Modern View]
|
| WI Dave
09-20-2012 06:43:37
71.82.168.91
|
I took off the right side frame rail to be sandblasted, and as I was cleaning up the bolts, I noticed that the 4 bolts that connect the frame rail to the clutch housing were not all the same size. One of the bolts is 1/4" shorter than the other three. Does the short bolt go in the top hole?
|
|
|
| D Slater
09-20-2012 10:00:04
184.15.50.155
|
|
Re: H Frame Rail Bolts in reply to WI Dave, 09-20-2012 06:43:37
|
|
| Top hole oil filter side.
|
|
|
| DeltaRed
09-20-2012 06:54:00
67.6.219.50
|
|
Re: H Frame Rail Bolts in reply to WI Dave, 09-20-2012 06:43:37
|
|
| Dont remember...Butyou can easily figure it out.Screw em in,If one bottoms before it 'seats',then you've found the short bolt hole.
|
|
|
| Duanes
09-20-2012 09:40:05
136.234.40.2
|
|
Re: H Frame Rail Bolts in reply to DeltaRed, 09-20-2012 06:54:00
|
|
| That may work in this instance but, not always a good way to find out ie: if, you did that in the base of a magneto you could ruin it.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
