Author	[Modern View]
BigTone 09-10-2012 14:09:50 166.248.5.241 Report to Moderator	where can I find a the gasket for the push rod cover for my M? I was told that its the same as the water jacket cover but its not...I hate paying Case/IH prices when I can get it somewhere else. The dealer is good for some stuff but the small stuff is killing me. Thanks, Anthony [Reply]   [No Email]
Rod51M 09-10-2012 18:22:12 71.254.222.210 Report to Moderator	Re: Push rod cover gasket in reply to BigTone, 09-10-2012 14:09:50   I just replaced mine. IH part #49029DB. It is cork and is much different from the water header gasket which is paper and the pushrod gasket doesn't nearly have as many bolt holes. $17.26 at my IH dealer. I hear ya about the small stuff killin' you - me too.   [Reply]  [No Email]
John M 09-10-2012 16:13:54 67.231.172.230 Report to Moderator	Re: Push rod cover gasket in reply to BigTone, 09-10-2012 14:09:50   Got a Felpro from my local parts place about a month or so ago, was about 9 bucks I think.   [Reply]  [No Email]
IAtractorKid 09-10-2012 16:13:32 184.97.45.87 Report to Moderator	Re: Push rod cover gasket in reply to BigTone, 09-10-2012 14:09:50   You can get them seperate from a complete gasket set. They are not to bad from IH...just got one for a SH a couple weeks ago. Seems like it was $13 or something.   [Reply]  [No Email]
rustyfarmall 09-10-2012 14:38:07 67.55.162.174 Report to Moderator	Re: Push rod cover gasket in reply to BigTone, 09-10-2012 14:09:50   Quoting Removed, click Modern View to see I've not found that gasket offered anywhere except as a part of the complete engine gasket set. Case-IH is probably your best option.   [Reply]  [No Email]
Zachary Hoyt 09-10-2012 14:23:33 184.12.64.194 Report to Moderator	Re: Push rod cover gasket in reply to BigTone, 09-10-2012 14:09:50   You can get a roll of rubberized cork gasket material and cut your own. A roll costs $5 up here and it is handy to have around. Zach   [Reply]  [No Email]